Metcalfe NA15 Commercial Bench Mounted Potato Peeler - 6.8kg

Metcalfe NA15 Bench Mounted Potato Peeler - Constructed from non-corrosive aluminium alloy castings, with the spindle housing & chute cast integrally, eliminating possible leakage.

Features:
• The patented guarded discharge chute protects the user by preventing hand access through the door aperture whilst the machine is working.
• There are no oiling or greasing points & no lubrication is required. All bearings are grease packed & permanently sealed.
• Coated on both sides - fine on one side for new potatoes & coarse on the other.
• The peeling chamber has cast-in abrasive serrations which removes the need for abrasive coating - this reduces potato loss.
• Top casting is removable without tools for easy cleaning.
• Natural Aluminium Finish.
• Dispenses with the need for interceptors so the waste pipe can be connected directly to the drain. The adaptor provides an additional water supply to the waste outlet to flush away the sludge. Water Bylaws Scheme - Approved product when connected to a water header tank.
• V-belt driven for noiseless transmission, with provision for belt tensioning if required.
• Inside wall of peeling chamber has pantented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling & boiling & the efficiency of the serrations will last the life of the machine.
• WATER INLET: Hose union with nozzle & provision for fitting on either side.
• WATER OUTLET: Tapped 1 ½ inch BSP ready for waste pipe to be connected. Provision for fitting on either side.
• EXTERNAL INTERCEPTOR: With tank & basket, a sink basket only or a length of waste pipe with elbow & coupling, if required.
• Approximately 6 minutes per full load!

Specifications:
• Finish: Natural aluminium.
• Capacity: 6.8kg.
• Usage: Medium duty.
• Motor: 0.33.
• Weight: 30kg.

Please note: the install kit contains:
• 3FT water inlet hose
• Tap Connector
• Waste Pipe
• Elbow
• Coupling
• Sink Skip

12 MONTHS PARTS & LABOUR WARRANTY

New

Dimensions:
W354 x D576 x H446mm

• 13A plug supplied
• Product downloads available

Power Requirements:
Motor: 0.33hp

Special Requirements:

Please refer to manufacturers specification

Downloads available for this product

• NA15 Operation Manual
• NA15 Exploded Diagram

Not found what you need? Call us directly on 01229 480001 where one of our advisers will be happy to help.

How can I pay for this item?

BUY ONLINE Check out using our secure payment system with a credit card, debit card or PayPal.

APPLY FOR LEASING Tailor your leasing deal to suit with our great value, flexible Lease to Buy options. Choose Lease to Buy on checkout and well contact you to discuss all your options.

BACS TRANSFER Please call our helpful sales team or Build Your Own Quote for a quotation or pro forma. Please refer to the quotation or pro forma reference when making the transfer.

CHEQUE We are happy to accept cheques although we do have to wait for the cheque to clear before we can despatch your order. Please call our sales team or Build Your Own Quote for a quotation or pro forma. Please refer to your quotation or pro forma reference when sending a cheque.