Metcalfe EP15 Commercial Bench Potato Peeler - 10lb/4.5kg

Metcalfe EP15 Belt Driven Bench Potato Peeler - Constructed from food grade, non-corrosive aluminium alloy castings, with the spindle housing and chute cast integrally, eliminating joints and possible leakage

Features:
• Constructed from food grade, non-corrosive, aluminium alloy castings.
• Spindle housing and chute cast integrally, eliminating joints and possible leakage.
• Available in grey hamer paint finish or in a natural aluminium.
• Pedestal is 90cm high, making the discharge chute 94cm (37") high.
• Sink-top/counter-top, pedestal or trolley mounted.
• Complies with all relevant safety standards and designed for ease of maintenance and cleaning.
• No lubrication is required. All bearings are grease packed and permanently sealed.
• V-belt driven for noiseless transmission, with provision for belt tensioning if required.
• Rotor plate coated on both sides, doubling its life. Fine grained abrasive for new potatoes on one side and coarse grained for old potatoes on the other.
• Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine.
• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean. Cleaning should be carried out on a daily basis.
• Water inlet. Hose union with nozzle and provision for fitting on either side.
• Water outlet. Tapped 1½" BSP ready for waste pipe to be connected. Provision for fitting on either side.
• Approximately 6 minutes per full load!

Specifications:
• Finish: Hammer grey.
• Capacity: 4.5kg.
• Usage: Medium duty.
• Motor: 0.33hp.
• Weight: 27kg.

Please note: the install kit contains:
• 3FT water inlet hose
• Tap Connector
• Waste Pipe
• Elbow
• Coupling
• Sink Skip

12 MONTHS PARTS & LABOUR WARRANTY

New

Dimensions:
W354 x D576 x H446mm.

Power Requirements:
Motor: 0.33hp.

Special Requirements:

Please refer to manufacturers specification

Downloads available for this product

• Metcalfe EP15 Instructions

Not found what you need? Call us directly on 01229 480001 where one of our advisers will be happy to help.

How can I pay for this item?

BUY ONLINE Check out using our secure payment system with a credit card, debit card or PayPal.

APPLY FOR LEASING Tailor your leasing deal to suit with our great value, flexible Lease to Buy options. Choose Lease to Buy on checkout and well contact you to discuss all your options.

BACS TRANSFER Please call our helpful sales team or Build Your Own Quote for a quotation or pro forma. Please refer to the quotation or pro forma reference when making the transfer.

CHEQUE We are happy to accept cheques although we do have to wait for the cheque to clear before we can despatch your order. Please call our sales team or Build Your Own Quote for a quotation or pro forma. Please refer to your quotation or pro forma reference when sending a cheque.